Threaded Ball Check Valves
1.Standert: oerienkomt mei API / DIN
2. Ferbining: BSP / BSPT / NPT
3.Material: Cast Iron / Ductile Iron
4. Normaal druk: PN10/16, ANSI 125/150
5. Grutte: DN25-DN80
Materiaal | ÛNDERDIEL | Diel | Materiaal |
| 1 | Lichem | Duktile lron |
| 2 | Bal | AL& EPDM/DI & EPDM |
| 3 | Gasket | NBR/EPDM |
| 4 | Bonnet | Duktile lron |
| 5 | Bolts | Rustfrij stiel |
| DN | L | G | L1 |
| 25 | 140 | 1” | 19.1 |
| 32 | 140 | 1.25" | 21.4 |
| 40 | 145 | 1,5" | 21.4 |
| 50 | 170 | 2” | 25.7 |
| 65 | 210 | 2.5" | 30.2 |
| 80 | 240 | 3” | 33.3 |
